C8 ZR1 shows speed on 5 tracks

[teamzr1]

The Corvette ZR1 & the team behind it continue to put the performance car world on notice. With four different General Motors drivers behind the wheel, the Corvette ZR1 has set not one, but five new production car lap records during a U.S. track tour.

Below are the five tracks and the Corvette ZR1’s lap times, each with a GM driver at the wheel:

• Watkins Glen Long Course: 1:52.7. Driver: Bill Wise, Lead Performance Engineer, Chassis Controls.
• Road America: 2:08.6. Driver: Brian Wallace, Lead Vehicle Dynamics Engineer.
• Road Atlanta: 1:22.8. Driver: Chris Barber, Lead Development Engineer.
• Virginia International Raceway Full Course: 1:47.7. Driver: Aaron Link, Global Vehicle Performance Manager.
• Virginia International Raceway Grand Course: 2:32.3. Driver: Aaron Link.

The drivers set out on this track tour with a pre-production Corvette ZR1 equipped with the optional ZTK Performance Package. The ZTK Package notably adds an aggressive, high-downforce rear wing, front dive planes, and a tall hood Gurney lip all constructed from woven carbon fiber. Underneath, underbody strakes replace the standard front underwing stall Gurney to substantially increase front downforce. The suspension tuning included in the ZTK package incorporates stiffer springs and adds Michelin Pilot Sport Cup 2R ZP tires.

With four different individuals behind the wheel of the Corvette ZR1, each with a different driving style, these lap times showcase the engineering prowess of the car. Future customers don’t need to be professional drivers to extract the ultimate performance of the 1,064-horsepower Corvette ZR1.

The drivers, with a combined 65 years of GM Level 6 driving experience, each brought racing and high-performance driving experience when joining General Motors. Individually, each driver quickly reached the top of GM’s driver certification program, and all achieved Nürburgring Industry Pool certification. This group was entrusted with pushing the Corvette ZR1 to its absolute limits on the highest speed, highest commitment tracks in the U.S.

“Corvette ZR1 continues to showcase how this nameplate elevates at every corner,” Corvette executive chief engineer Tony Roma said. “From design, engineering, development, validation, to driving and setting incredible lap records like these we do it all in house.”

Corvette ZR1 with the ZTK Package boasts a top speed of 233 mph on the racetrack, 0-60 mph time of 2.3 seconds1, and quarter-mile time of 9.6 seconds. With these figures, no current production car under $1 million rivals Corvette ZR1.

MSRPs* for the Corvette ZR1 start at $174,995 (including $1,695 DFC) for the 1LZ coupe and $184,995 (including DFC) for the 1LZ hardtop convertible.

Production is scheduled to begin at General Motors’ Bowling Green Assembly plant in Kentucky in the second quarter of 2025, and Chevrolet will begin accepting orders later this month

<iframe width="660" height="415" src="

" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

<iframe width="660" height="415" src="

" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

<iframe width="660" height="415" src="

" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

<iframe width="660" height="415" src="

" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

<iframe width="660" height="415" src="

" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

 

[teamzr1]

Another day, another bonkers achievement for the 2025 Corvette ZR1.
Not content to be the fastest, most powerful Vette ever, Chevrolet aimed its crosshairs at several more superlatives. While in development, the new mid-engine monster flexed its prodigious muscle and remarkable athleticism at four different U.S. tracks, where it claimed five production-car lap records.
The C8-generation ZR1 is now King of the Hill at Watkins Glen, Road America, Road Atlanta, and at Virginia International Raceway’s Grand Course as well as its Full Course.

Here are the five courses, along with the record times (all executed in the second half of 2024) and the corresponding GM development driver behind the wheel:
• Watkins Glen Long Course (1:52.7); Driver: Bill Wise, Lead Performance Engineer, Chassis Controls.
• Road America (2:08.6); Driver: Brian Wallace, Lead Vehicle Dynamics Engineer.
• Road Atlanta (1:22.8); Driver: Chris Barber, Lead Development Engineer.
• Virginia International Raceway Full Course (1:47.7); Driver: Aaron Link, Global Vehicle Performance Manager.
• Virginia International Raceway Grand Course (2:32.3); Driver: Aaron Link.

Hagerty sat down with these four development drivers at GM’s Tech Center in Warren, Michigan, for an exclusive interview. In our conversation, the team explained just how extreme the 1064-hp, 828 lb-ft Corvette ZR1 is on track, and how GM goes about the process of chasing lap records in the first place.
But before we get into that discussion, let’s put some of these lap times in perspective.

The margins by which the ZR1 claimed these records are measured in seconds, not tenths. At VIR, on the Grand Course, the ZR1’s 2:32.3 lap beat that of the McLaren Senna by 2.6 seconds (set in 2019 at Car and Driver’s Lightning Lap event.) On VIR’s Full Course, the ZR1 bested its predecessor, the 755-gp C7-generation ZR1 from 2019, by 3.5 seconds.
That 1064 hp and bulletproof chassis warped our perception on what fast is.

The previous production car record-holder at Road Atlanta was the 991-generation Porsche 911 GT2 RS, which set a time of 1:24.88 in 2019. The ZR1 beat it by two seconds, and in doing so also surpassed the C7 ZR1’s time by 3.6 seconds. For some really juicy context, consider that the ZR1a street car came within five seconds of the Z06 GT3.R race car’s October 2024 Petit Le Mans qualifying time at Road Atlanta.
You can see in the accompanying track footage how much this track asks of a car’s braking system, especially when said car has 1064 hp. According to the on-board telematics, there were two sections during which the ZR1 hit 2.0 g of deceleration.

On to Road America and Watkins Glen. At the former, the ZR1’s 2:08.6 lap time put the Corvette more than five seconds (!) ahead of the 992-generation Porsche 911 GT3 RS, which set its record in 2023. It was here at Road America, on the front straight, that the ZR1 hit its top speed at all the tracks: 188 mph. There isn’t much precedent for production-car lap times at Watkins Glen, but the team felt it was important to plant their flag at what they consider one of the nation’s most storied tracks.
On this course, the ZR1 saw its highest lateral g, which according to the Chevrolet’s footage peaked at 2.6.

t’s worth noting that the GM hot shoes behind the wheel of these cars are professional engineers, not pro racers, though they all had experience in competition and high-performance environments before joining the company. All four Link, Wallace, Wise, and Barber are certified by GM as Level 6 drivers, which is the highest possible internally, and each has Nürburgring Industry Pool certification.

The ZR1 performance development program started two years ago. The true origin of the platform goes back ten years, but once the design team handed off the car to the hardware and development engineers, they hit the ground running. The quartet of wheelmen we spoke with is focused mostly on ride and handling, but the overall division is ultimately looking out for the whole-car experience, down to ironing out every squeak and rattle.

The ZR1’s first stop was home turf: GM’s Milford Proving Grounds. “It was pretty eye-opening at the MRC, the Milford Road Course,” explains Chris Barber, Lead Development Engineer for the ZR1. “On its maiden voyage, its peak speed on our straightaway there was already faster than the previous-gen ZR1. So right out of the gate, it was five or so miles an hour faster.
Something around 178 mph. It’s even faster now. And that straightaway is really a bend, the whole way, since MRC is essentially built on a big oval. At those speeds, it’s a max live curve.”

If that doesn’t prompt your neck hairs to attention, consider that these test runs were in a pre-production prototype without any traction or stability control. (It was this team’s job to precisely calibrate those systems.) “You’re kind of wheeling it yourself, and it makes turns out of things that have never been turns on our track,” says Aaron Link, Global Vehicle Performance Manager.
“You have to kind of set it up and dance on the edge of traction to make sure you don’t track out too early, or too much, in a banked corner. It’s tricky. We realized we kind of outgrew our own track [at MRC].”

The ZR1 was so potent that the first few people to drive it in this early form immediately sought to “rein in” those who got behind the wheel in risky situations. “This car crossed a threshold,” says Link. “We were like ‘holy cow this requires the most experienced and trustworthy team, and that’s who we have here.”

Link and Bill Wise (Lead Performance Engineer, Chassis Controls) were veterans of the sixth-generation Camaro project, while Barber and Brian Wallace (Lead Vehicle Dynamics Engineer) were part of the C7 and C8 Corvette teams from the beginning. The foursome pitched to management the idea of chasing some high-profile track records, and they got dispensation to do so at four locales one for each driver.

So, which tracks to target? Wallace points to VIR as a track that pushes you in every possible way. “It has low-speed corners all the way up to 155-mph max lat (lateral g). We focus on tracks that have aero content so we can make sure our aero balance is where we want it. The low-speed stuff really helps for differential integration and ABS integration.”

Road Atlanta and VIR had the practical benefit of warm weather during the fall and winter months when Milford was too cold, and they especially challenge a car with high speeds, high brake power, and high average RPM. But ultimately, for such an exercise, the four tracks were selected because of the opportunity to showcase the ZR1’s ferocity and capability at big-name tracks.
Road America and Watkins Glen in particular have a certain historical pedigree with which GM wanted to associate this monumental mid-engine ZR1.

 

[teamzr1]

The red Corvette pictured here was used for all four records. It is a pre-production prototype with the ZR1’s ZTK track package: a rear wing, front dive planes, and hood Gurney lip all made of carbon fiber, underbody strakes, stiffer springs, and magnetic ride tuning, and finally, Michelin Pilot Sport Cup 2R ZP tires. The rubber is made from the same compound as the Z06 tires, albeit wrapped around a modified internal carcass and construction that is designed to deal with the ZR1’s higher loads.
The car also utilizes Chevy’s optional carbon-fiber wheels.

Aside from a racing seat and a roll bar, the red ZR1 that the development team drove at all four tracks is almost completely factory. The Racetech driver’s seat, wearing an American flag patch on the outer side, is fixed in position with a large metal bracket in a fashion perfected by the Corvette GT3 race crew.

Link says that they have never previously needed to include a race seat on prior development cars, but that the lateral forces are so intense in the ZR1 that the “ridiculously stiff seat gives you a good feeling when you’re trying to place the car,” on track
. The roll bar is attached at the seat belt anchor and the floor, adding some stiffness but also “a lot of weight,” so Link considers it a fair trade-off.

Other changes include ATE 200 brake fluid (which has a higher boiling point than the factory DOT 4 fluid), and a handful of 3D-printed aero parts, such as the stanchion for the rear wing, but are nevertheless “fully representative” of the production carbon-fiber bits. Barber is especially proud of the fact that the development car ran on ordinary 93-octane pump gas. “There are no games with the fuel at all.”

We used to worry about engine soak, ambient soak temperatures, or running the car from cold for top performance. This engine doesn’t give a shit.
In terms of setup, GM prepped the record-setting Corvette ZR1 according to the same track supplement guide that every customer will get in their owner’s manual. Aerodynamics are fixed, but the camber, caster, toe, and ride height are all adjustable.

The window of optimal track performance, however, given the huge tires and immense power, is fairly narrow and not wildly different from the street specification. Here’s Link again: “A lot of people on the outside think, ‘well I’ve got to go to four degrees of camber to get the max out of this car,’ but that hurts the shoulders of the tires too much. And then you end up kind of on the inside edge of the tire and not using their full capability.”

The development team thus paid a lot more attention to ambient temperature, track temperature, optimal tire temperature, and optimal tire pressure, all of which varied from track to track. “Because each track is of different length, you’ll get tire temps peaking at different ranges,” explains Wise. “So we’ll play some games with tire pressures when chasing a lap time starting pressures to get to the peak when we want it.”

Experts from Michelin were on hand to monitor these factors, and at times they used racing-style tire warmers to reach ideal starting temperatures for the tires.
All four drivers achieved their records with the ZR1’s Performance Traction Management (PTM) traction and stability control system set to Mode 5, or Race. In this setting, which elicits the most performance out of the car, stability control is off but traction control is on.

That means the ZR1 won’t help if you put it into a spin, but it does assist with putting down power to optimize off-corner launches and acceleration.
“With 1064 hp, even when you try not to engage PTM, you still do,” notes Wallace. “Especially in the early stages of development, the car just stepped out a lot.

We tuned it such that when you get to the middle of the corner and you’re ready to accelerate, you just put it to the floor and let the computer do the work. Then you just steer yourself off the corner.”
Any rotation that the car permits in these situations is there to let the car go faster and ultimately optimize lap times, qualifies Barber. But the driver still needs to counter-steer, and all of this is happening absurdly quickly. All four drivers likened the ZR1 experience to a Z06 “on fast-forward.”

Benchmark cars for the ZR1’s development, aside from the C8 Stingray Z51 and Z06, were the outgoing C7 ZR1 as well as the Porsche 911 GT2 RS.
The team also used track data and onboard footage (rather than any live testing) from the 911 GT3 RS and Corvette GT3 race car. GM’s state-of-the-art simulator loop at Milford can represent the C8.R IMSA car, which also helped the team prepare for their track outings.

The GT2 RS came with them to various circuits, where the Corvette team was impressed by its track prowess. On public roads, however, the car’s weaknesses became clearer, Barber tells us.
“You’d think everyone would be clamoring to drive the GT2 RS, but afterward nobody wanted to drive that car on the street again, because it’s so compromised.” Link points to the car’s Heim joints (rather than traditional ball joints) as one culprit, contributing to higher road input and cabin noise.

The ZR1’s high aerodynamic downforce was of particular use at Watkins Glen, says Wise, where average track speed is high but top speed is less important than at the other three tracks. When given the opportunity to really stretch the car’s legs, however, the team was blown away by its acceleration in higher gears and monster torque, which peaks at just 3000 rpm.

“The kink at Road Atlanta coming down the hill to the brake zone and into turn 10 that was a different experience,” Barber recalls. “That’s what kind of what made me say ‘holy shit,’ because you’re clicking into sixth year at 178 mph there and you still have to make it around the corner and figure out where you’re going to brake.
That’s really the kind of experience you see in IMSA cars. We’ve had plenty of fast cars at this company before, and capable ones, but this takes it to a different level of how it punches through the air in fourth and fifth gear. Just relentless power.“

Compared with the naturally aspirated Z06, which thrives at higher rpm, Link explains, the ZR1 hardly ever needs to be in anything below third gear. With the turbos it generates 37 pounds of max thrust simply from the air running through the muffler.
If you could apply that force to a ZR1 on a flat surface, with the transmission in neutral, it would be enough to move the car, says Link.

That 1064 hp and bulletproof chassis “warped our perception on what fast is,” says Wise. “You carry a bunch of commitment into the corner, pile it in, and you’re doing a higher max lat than you’ve ever done before and now you’ve got double the power you’re used to on the exit.”
Durability was never a problem, either, according to Link:

“We used to worry about engine soak, ambient soak temperatures, or running the car from cold for top performance. This engine doesn’t give a shit. We’d think, ‘Should we cool it? Should we put fans on it? Should we at least pop the hatch while we’re waiting between runs?’
The ZR1 didn’t care. You could watch the top speed on every lap you did and it was the same.
The cooling is so good, and the capability of the engine is such that it doesn’t have to be tuned to the knife edge of spark knock.”

The beauty of the ZR1, the development team says, is that all of this performance doesn’t come at the expense of approachability, even on the street. Fourth-gen magnetic ride suspension is the secret there, along with an incredibly stiff structure, allowing the driver to “have their cake and eat it too,” in terms of balancing performance with livability.

As we end our conversation, Link wants to stress that the ZR1 is a homegrown marvel. It seems to be a subtle dig at Ford, which partners with Multimatic to produce the $325,000+ Mustang GTD. “We’re real proud that this car is engineered here in Michigan and built in Kentucky.
We don’t farm any of this out to outside companies.
Our connection with Pratt and Miller obviously is big, but this was all us.”

 

[teamzr1]

The King of Corvettes, the ZR1, continues to live up to its name.

The Chevy’s top, track-course performance trim has shattered production car lap records at five of North America’s top racetracks, making it the quickest supercar in the U.S. market. With 1,064 horsepower, a twin-turbo V-8, 233 mph top speed, and 2.3-second 0-60 mph acceleration, the ZR1 set records at Watkins Glen, Road America, Road Atlanta and Virginia International Raceway (on two courses), with straightway speeds rivaling IndyCars that race at some of those same circuits.

At Road America in Wisconsin, for example, the ZR1 hit 188 mph on the front straight, on par with Chevy-powered IndyCars piloted by Team Penske drivers.
The Corvette’s ballistic acceleration helped it to obliterate the previous, 2.13.8-minute Road American lap record around the four-mile, 14-turn course set by Porsche’s track-focused 911 GT3 RS in 2023.
The ZR1’s time: an astonishing 2.08.6.

“Corvette ZR1 continues to showcase how this nameplate elevates at every corner,” said Corvette executive chief engineer Tony Roma. “From design, engineering, development, validation, to driving and setting incredible lap records like these we do it all in house.”

The records were achieved not by professional drivers, but by race-licensed Corvette engineers (Lead Vehicle Dynamics Engineer Brian Wallace set the Road America lap). Lap records at four other tracks include:

- Watkins Glen Long Course: 1:52.7 (Driver: Bill Wise, lead performance engineer, chassis controls)
- Road Atlanta: 1:22.8 (Driver: Chris Barber, lead development engineer)
- Virginia International Raceway Full Course: 1:47.7 (Driver: Aaron Link, global vehicle performance manager)
- Virginia International Raceway Grand Course: 2:32.3. (Driver: Aaron Link)

The records were all set in street-legal ‘Vettes equipped with (lightly) treated, Michelin Pilot Sport Cup 2R ZP tires and the ZR1’s optional, high-downforce ZTK Performance Package, which includes a carbon-fiber high rear wing, front dive planes and a tall hood Gurney lip. The ZTK package also stiffens the suspension for better handling. Add slick racing tires, and the ZR1’s times would rival the IMSA Weathertech Corvette Z06 GT3.R race car, with which it shared development.

Last year pro driver Nick Catsburg put the Corvette Racing GT3.R racer on pole for the IMSA race with a qualifying lap record of 2 minutes, 2.2 minutes just over six seconds quicker than the luxurious, leather-throned ZR1 with its full interior infotainment and stereo system intact.
The 2:32.3 VIR Grand Course lap pipped the 3.34.9-minute record previously set by the $982,816 McLaren Senna a limited edition 2019 supercar based on McLaren’s Formula One technology.

The ZR1 retails at less than 1/5th the cost of the Senna, with a starting sticker of $174,995. Add the ZTK track pack and the price will push $200k.
The ZR1’s team of test drivers are all certified to lap the famed Nürburgring the epic, 13-mile German track that is the international standard for car performance and Chevy no doubt has its eyes set on that track record as well.
Orders for the 2025 ZR1 open later this month, and production is scheduled to begin at General Motors Co.'s Bowling Green Assembly plant in Kentucky in the second quarter of the year.

 

[Invetterate]

Good news and a great start for the ZR1 particularly in its home market!

Now let's get one to the Nürburgring Nordschleife please GM! This is the only really international comparison. We want under 7 minutes and preferably under 6:38.

Impressed that the Vette was driven by Corvette team members but a pro would be very useful for the Nordschleife given that the course is 12.9 miles long and has 154 corners with an altitude change of around 1000 feet over its length!

Can the Vette do it? Let's hope so. If it does, Chevy may have to put on double shifts at Bowling Green to fulfil the orders!